ISO Rodamientos De Bolas Autoalineables

Contacta ahora

Self-aligning ball bearings are particularly suitable:
if there is skewing between the outer and inner ring (for the compensation of angular misalignments)
for bearing arrangements with high radial loads for higher speeds on account of their point contact, than barrel roller bearings with line contact
where bearings with the above-mentioned characteristics are expected to run more quietly and at lower temperatures, even at high speeds.

Self-aligning ball barings have two rows of balls, a common sphered raceway in the outer ring and two deep uninterrupted raceway grooves in the inner ring. They are available open or sealed. The bearings are insensitive to angular misalignment of the shaft relative to the housing ,which can be caused, for example, by shaft deflection.

85 mm x 180 mm x 41 mm ISO 1317K+H317 Rodamientos De Bolas Autoalineables

1 mm 9200 r/min
19 mm 45

45 mm x 85 mm x 23 mm ISO 2209K+H309 Rodamientos De Bolas Autoalineables

13.5 mm 60 mm
7 mm 3 °

75 mm x 130 mm x 31 mm ISO 2215K Rodamientos De Bolas Autoalineables

180 mm 1989 r/min
345 kN 45

80 mm x 140 mm x 26 mm ISO 1216 Rodamientos De Bolas Autoalineables

30 3.7502
0.095 AST

35 mm x 72 mm x 17 mm ISO 1207 Rodamientos De Bolas Autoalineables

NKE 37 mm
2,1 mm 35 mm x 72 mm x 17 mm

75 mm x 160 mm x 55 mm ISO 2315K Rodamientos De Bolas Autoalineables

16 45
68,5 mm 75 mm x 160 mm x 55 mm

ISO 11309 Rodamientos De Bolas Autoalineables

K25X31X24FH 38.5
25.3 24 mm

85 mm x 150 mm x 36 mm ISO 2217K Rodamientos De Bolas Autoalineables

VOLVO / S40 V40 / e R165.24
CX VKBA 3487

90 mm x 160 mm x 30 mm ISO 1218K+H218 Rodamientos De Bolas Autoalineables

713619500 VKBA 3906
CX622 CX
1/5